Centroid M400

We acquired 3 used Centroid M400 mill packages in 2021. We aren’t sure exactly what projects they might go to, so we might sell them off. Since Centroid stuff rarely shows up on the used market, this is a pretty unique opportunity.

Contact us to discuss!

These systems were purchased new around 2015-2016 and used in a clean mold shop, mostly cutting graphite. There were all installed by a very experienced Centroid tech rep out of the Pittsburgh area. We were told the three systems cost $65,000 to retrofit then.

All components are in clean, dry, temperature-controlled storage with forklift access. Control consoles will be demonstrated under power, but entire systems are not assembled.

Large Mill Package

Large system with AC servomotors

The large system has:

  • Large arm system with LCD control console
  • M400 mill control package
  • Centroid factory electrical cabinet
  • three AC servomotors, 11.5 N-m stall torque
  • three AC/DC-30 Centroid servo drives
  • Yaskawa F7 VFD for spindle (31 amps output)
  • Includes all salvaged cabling, timing belt pulleys, belts?
  • Control units were started after disassembly and are powered periodically to protect SSDs
  • Supposed to have unlimited program size option
  • Note: no ATC installed, but Centroid rep says no problem adding it
  • Removed by experienced people!

Small Mill Packages (2x)

The small packages have:

  • Arm system with LCD control console
  • One system has inoperable touchscreen
  • One system has operable touchscreen
  • Centroid factory electrical cabinets
  • three DC servomotors, ? N-m stall torque
  • built-in Centroid DC servo drives
  • Spindle VFDs are (going off memory!) DURApulse
    (AutomationDirect.com)
  • Handheld MPG included
  • Includes all salvaged cabling, timing belt pulleys, belts?
  • Control units were started after disassembly and are powered periodically to protect SSDs
  • Supposed to have unlimited program size option
  • Note: no ATC installed, but Centroid rep says no problem adding it
  • Removed by experienced people!
  • FYI, this package lists on ebay for about $12500 new
Typical control console

Bostomatic Tooling

Some tooling and the large spindle from these Bostomatic machines is available. Drop us a line for details.